应用场景:家庭宽带动态公网IP
路由器设置定时执行脚本即可完美使用
脚本内容
API_ID=100000 # DNSPod ID
API_Token=7ea5cxxxxxxxxxxxxxxxxxxxxxxxxxxx # DNSPod Token
host= # 子域名,如:ddns
domain= # 父域名,如:baidu.com ,访问为:ddns.baidu.com
CHECKURL="http://ip.3322.org"
. /etc/profile
date
if (echo $CHECKURL |grep -q "://");then
IPREX='([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])\.([0-9]{1,2}|1[0-9][0-9]|2[0-4][0-9]|25[0-5])'
URLIP=$(curl -4 -k $(if [ -n "$OUT" ]; then echo "--interface $OUT"; fi) -s $CHECKURL|grep -Eo "$IPREX"|tail -n1)
if (echo $URLIP |grep -qEvo "$IPREX");then
URLIP="Get $DOMAIN URLIP Failed."
fi
echo "[URL IP]:$URLIP"
dnscmd="nslookup";type nslookup >/dev/null 2>&1||dnscmd="ping -c1"
DNSTEST=$($dnscmd $host.$domain)
if [ "$?" != 0 ]&&[ "$dnscmd" == "nslookup" ]||(echo $DNSTEST |grep -qEvo "$IPREX");then
DNSIP="Get $host.$domain DNS Failed."
else DNSIP=$(echo $DNSTEST|grep -Eo "$IPREX"|tail -n1)
fi
echo "[DNS IP]:$DNSIP"
if [ "$DNSIP" == "$URLIP" ];then
echo "IP SAME IN DNS,SKIP UPDATE."
exit
fi
fi
token="login_token=${API_ID},${API_Token}&format=json&lang=en&error_on_empty=yes&domain=${domain}&sub_domain=${host}"
Record="$(curl -4 -k $(if [ -n "$OUT" ]; then echo "--interface $OUT"; fi) -s -X POST https://dnsapi.cn/Record.List -d "${token}")"
iferr="$(echo ${Record#*code}|cut -d'"' -f3)"
if [ "$iferr" == "1" ];then
record_ip=$(echo ${Record#*value}|cut -d'"' -f3)
echo "[API IP]:$record_ip"
if [ "$record_ip" == "$URLIP" ];then
echo "IP SAME IN API,SKIP UPDATE."
exit
fi
record_id=$(echo ${Record#*\"records\"\:\[\{\"id\"}|cut -d'"' -f2)
record_line_id=$(echo ${Record#*line_id}|cut -d'"' -f3)
echo Start DDNS update...
ddns="$(curl -4 -k $(if [ -n "$OUT" ]; then echo "--interface $OUT"; fi) -s -X POST https://dnsapi.cn/Record.Ddns -d "${token}&record_id=${record_id}&record_line_id=${record_line_id}")"
ddns_result="$(echo ${ddns#*message\"}|cut -d'"' -f2)"
echo -n "DDNS upadte result:$ddns_result "
echo $ddns|grep -Eo "$IPREX"|tail -n1
else echo -n Get $host.$domain error :
echo $(echo ${Record#*message\"})|cut -d'"' -f2
fi
版权声明:本文为原创文章,版权归 Cooluc's Blog 所有,转载请注明出处!
本文链接:https://www.cooluc.com/archives/104.html
友情提示:如果博客出现404或链接失效,请留言或者联系博主修复!